Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
1
- Spring in the leg support
- 6 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackProTent 2000
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Pulling the foot support out of the support leg
- Pull the foot support out of the support leg.
Pull the foot support out of the support leg.
1024
Step 2
Pushing out a faulty or incorrectly seated spring
- Use a thin rod (eg a cable tube) to push through the support from the foot side and gently push the spring downwards.
- Pull the spring out of the support leg at the bottom.
Use a thin rod (eg a cable tube) to push through the support from the foot side and gently push the spring downwards.
Pull the spring out of the support leg at the bottom.
Step 3
Inserting the spring into the support leg
- Insert the spring with the curved side forward from the foot side into the support leg.
- The spring bolt must point to the same side as the hole in the bottom of the foot bar.
Insert the spring with the curved side forward from the foot side into the support leg.
The spring bolt must point to the same side as the hole in the bottom of the foot bar.
Step 4
Pushing the spring down
- Push the spring all the way into the foot.
- Then put in the rod again and carefully push the spring downwards.
Push the spring all the way into the foot.
Then put in the rod again and carefully push the spring downwards.
Step 5
Placing the spring correctly
- When the spring appears in the hole, continue to push gently until the bolt pops into the hole.
When the spring appears in the hole, continue to push gently until the bolt pops into the hole.
Step 6
- Now push the foot support back into the support leg.
Now push the foot support back into the support leg.
Congratulations, you did it.
Cancel: I did not complete this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Annika Faelker
Martin Kubica
Author
with 1 other contributor
Markus Mauchle
Member since: 09/17/2017
133 Reputation
1 Guide authored
Badges:
1