Protocol Dronium Two Hd Camera Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 minutes            

Sections

2

• Landing Gear
• 2 steps
• HD Camera
• 4 steps

Flags

0

• BackProtocol Dronium Two

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Landing Gear               

• Turn device off by moving the selector switch to the left.

Turn device off by moving the selector switch to the left.

1024

Step 2

• Place one hand on the drone and carefully remove the landing gear with the other hand.
• Be gentle as to not break off the studs on the landing gear.

Place one hand on the drone and carefully remove the landing gear with the other hand.

Be gentle as to not break off the studs on the landing gear.

Step 3

              HD Camera               

• Use the fine edged plastic opening tool to pull up one side of the plug, and then the other, until it comes loose.

Use the fine edged plastic opening tool to pull up one side of the plug, and then the other, until it comes loose.

Step 4

• Push the battery cover away from the drone and carefully open it up.

Push the battery cover away from the drone and carefully open it up.

Step 5

• Carefully remove the two Phillips 5.35 mm screws holding the camera to the battery cover.

Carefully remove the two Phillips 5.35 mm screws holding the camera to the battery cover.

Step 6

• Close the battery cover by pulling it towards you. Then, gently pull the camera towards you, freeing it from the battery cover.

Close the battery cover by pulling it towards you. Then, gently pull the camera towards you, freeing it from the battery cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    William Tietz                     

Member since: 01/18/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Arkansas State University, Team 1-2, Chamberlain Spring 2017                        

                                                  Member of Arkansas State University, Team 1-2, Chamberlain Spring 2017 



                    ARSU-CHAMBERLAIN-S17S1G2                     


                                            4 Members                     


                                            5 Guides authored