Difficulty
Moderate
Steps
4
Time Required
4 minutes
Sections
1
- Remote Power Button
- 4 steps
Flags
0
BackProtocol DURA VR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remote Power Button
- Remove the four 0.8mm Phillips #0 screws from the back casing of the remote.
Remove the four 0.8mm Phillips #0 screws from the back casing of the remote.
1024
Step 2
- Remove the three 0.7mm Phillips #0 screws from the motherboard.
Remove the three 0.7mm Phillips #0 screws from the motherboard.
Step 3
- Move the motherboard up to allow room for the power bottom to become visible and loose.
Move the motherboard up to allow room for the power bottom to become visible and loose.
Step 4
- Place the remote face up. Then pick up the broken power button and replace with a new button.
Place the remote face up. Then pick up the broken power button and replace with a new button.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Kayla Brown
Member since: 03/22/2018
491 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
Sam Houston State, Team S17-G5, Blackburne Spring 2018
Member of Sam Houston State, Team S17-G5, Blackburne Spring 2018
SHSU-BLACKBURNE-S18S17G5
4 Members
5 Guides authored