Difficulty

Moderate

Steps

4

Time Required

                          15 minutes

Sections

1

  • Virtual Reality Lens
  • 4 steps

Flags

2

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackProtocol Kaptur GPS

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Virtual Reality Lens
  • Remove the phone slide from the virtual reality lens.
  • Take the outside cover off using a plastic opening tool.

Remove the phone slide from the virtual reality lens.

Take the outside cover off using a plastic opening tool.

1024

Step 2

  • Remove each screw from its place.
  • Four screws will be 6mm Phillips head.
  • Twelve screws will be 7mm Phillips head.
  • Pull each bracket out so you can see the full lens case.

Remove each screw from its place.

Four screws will be 6mm Phillips head.

Twelve screws will be 7mm Phillips head.

Pull each bracket out so you can see the full lens case.

Step 3

  • You will need to remove the adjustable lens lever on top of the virtual reality lens.
  • Using a tweezers, you will need to separate the tooth gears and remove them so the lens can fall freely out.
  • Pull the lens case out from the front of the headset.

You will need to remove the adjustable lens lever on top of the virtual reality lens.

Using a tweezers, you will need to separate the tooth gears and remove them so the lens can fall freely out.

Pull the lens case out from the front of the headset.

Step 4

  • To get the actual lens out, you will need to push the lens from the outside in with a little force to break the lens out of it’s case.

To get the actual lens out, you will need to push the lens from the outside in with a little force to break the lens out of it’s case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Austin Fedie

Member since: 02/15/2018

168 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UW Stout, Team S8-G6, Ogden Spring 2018                        

                                                  Member of UW Stout, Team S8-G6, Ogden Spring 2018 



                    UWSTOUT-OGDEN-S18S8G6                     


                                            3 Members                     


                                            4 Guides authored