Difficulty
Easy
Steps
3
Time Required
2 minutes
Sections
1
- Battery
- 3 steps
Flags
Step Trimmer
This guide has unnecessary steps. Trim them to be more concise!
BackProtocol Slipstream EVO
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- On the bottom of the drone unscrew the screws next to the battery, using the screwdriver provided.
- The picture shows one of the screws you will be removing, the other screw is directly across from the one being presented.
- Tip: Removing the screws will loosen the frame of the drone allowing the battery to be removed easier. If you do not want to remove the screws skip to step 2.
On the bottom of the drone unscrew the screws next to the battery, using the screwdriver provided.
The picture shows one of the screws you will be removing, the other screw is directly across from the one being presented.
Tip: Removing the screws will loosen the frame of the drone allowing the battery to be removed easier. If you do not want to remove the screws skip to step 2.
1024
Step 2
- Pinch the side of the battery that is already exposed and pull until the battery is fully removed from the drone.
Pinch the side of the battery that is already exposed and pull until the battery is fully removed from the drone.
Step 3
- With the replacement battery, insert it where you removed the faulty battery until it fully secured within the drone.
- Replace screws that were removed earlier if you did not skip step 1.
With the replacement battery, insert it where you removed the faulty battery until it fully secured within the drone.
Replace screws that were removed earlier if you did not skip step 1.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Michael Dang
Member since: 04/10/2017
301 Reputation
3 Guides authored
Badges:
3
Team
UW Tacoma, Team S3-G3, Liner Spring 2017
Member of UW Tacoma, Team S3-G3, Liner Spring 2017
UWT-LINER-S17S3G3
4 Members
3 Guides authored