Difficulty
Easy
Steps
5
Time Required
3 - 5 minutes
Sections
2
- Propellers
- 2 steps
- Front Wheels
- 3 steps
Flags
0
BackProtocol TerraCopter EVO
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Propellers
- Using a Phillips #0 screwdriver, remove the four screws connecting the propellers to the device.
Using a Phillips #0 screwdriver, remove the four screws connecting the propellers to the device.
1024
Step 2
- Hold the propellers gently and pull the propellers out of the drone .
Hold the propellers gently and pull the propellers out of the drone .
Step 3
Front Wheels
- Use a plastic opening tool or a spudger to separate the drone’s cover from the body of the drone.
- Remove the connector of the drone body and the back wheels using a plastic opening tool.
Use a plastic opening tool or a spudger to separate the drone’s cover from the body of the drone.
Remove the connector of the drone body and the back wheels using a plastic opening tool.
Step 4
- Use the opening tool to separate the drone’s body from the drone’s shock absorber.
Use the opening tool to separate the drone’s body from the drone’s shock absorber.
Step 5
- Hold the wheels gently then pull it out of the drone’s lower board wheels connector.
- Repeat the same step for the other front wheel.
Hold the wheels gently then pull it out of the drone’s lower board wheels connector.
Repeat the same step for the other front wheel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Tri Luong
Member since: 01/17/2018
327 Reputation
3 Guides authored
Badges:
4
+1 more badge
Team
Eastern Washington University, Team S1-G3, Ramos Winter 2018
Member of Eastern Washington University, Team S1-G3, Ramos Winter 2018
EWU-RAMOS-W18S1G3
4 Members
5 Guides authored
