Difficulty
Moderate
Steps
7
Time Required
35 minutes
Sections
1
- Propeller Motors
- 7 steps
Flags
0
BackProtocol VideoDrone AP
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Remember to use the included screwdriver that came with your drone.
A soldering iron is required, so keep one ready.
What you need
Step 1
Propeller Motors
- Power off the drone before proceeding with the rest of the guide.
Power off the drone before proceeding with the rest of the guide.
1024
Step 2
- Use the Phillips #0 screwdriver to remove four propeller screws.
- If you don’t own the screwdriver included with the drone kit, use a Phillips #0 screwdriver.
Use the Phillips #0 screwdriver to remove four propeller screws.
If you don’t own the screwdriver included with the drone kit, use a Phillips #0 screwdriver.
Step 3
- Use the Phillips #0 screwdriver to remove eight propeller guard screws.
Use the Phillips #0 screwdriver to remove eight propeller guard screws.
Step 4
- Use the Phillips #0 screwdriver to remove eight housing screws from the bottom of the drone.
Use the Phillips #0 screwdriver to remove eight housing screws from the bottom of the drone.
Step 5
- Open up housing to reveal main circuit board.
Open up housing to reveal main circuit board.
Step 6
- Use the Phillips #0 screwdriver to remove three motor housing screws. There are three screws per motor.
- The plastic housing is glued directly to motor.
Use the Phillips #0 screwdriver to remove three motor housing screws. There are three screws per motor.
The plastic housing is glued directly to motor.
Step 7
- Desolder the wires connecting the propeller motor to the motherboard (2 per motor) and remove the motor from the device.
- For more information on soldering connections, please visit the How to Solder and Desolder Connections guide.
Desolder the wires connecting the propeller motor to the motherboard (2 per motor) and remove the motor from the device.
For more information on soldering connections, please visit the How to Solder and Desolder Connections guide.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Karan Paranganat
Member since: 11/07/2019
352 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
IUPUI, Team S2-G2, Harley Fall 2019
Member of IUPUI, Team S2-G2, Harley Fall 2019
IUPUI-HARLEY-F19S2G2
3 Members
2 Guides authored
