Ps Vita Slim Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Back Panel
4 steps
Motherboard
4 steps

Flags

BackSony PlayStation Vita Slim
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel

Taking apart your device may void the warranty on the device, please proceed with caution and consider having it sent in first if possible to be worked on by the company.
Please make sure the system is completely powered off and all SD storage cards are removed before starting the removal process
All 6.35mm screws were removed using a J00 bit from the iFixit pro toolkit.
There are four screws on the back of the device, remove them as shown.

Taking apart your device may void the warranty on the device, please proceed with caution and consider having it sent in first if possible to be worked on by the company.

Please make sure the system is completely powered off and all SD storage cards are removed before starting the removal process

All 6.35mm screws were removed using a J00 bit from the iFixit pro toolkit.

There are four screws on the back of the device, remove them as shown.

1024

Step 2

There are two screws on the bottom, near the charging port, remove them using the J00 screwdriver on the 6.35mm screws from the iFixit pro toolkit.
Finally, remove the top screw under the dust cover using the J00 screwdriver on the 6.35mm screws from the iFixit pro toolkit.

There are two screws on the bottom, near the charging port, remove them using the J00 screwdriver on the 6.35mm screws from the iFixit pro toolkit.

Finally, remove the top screw under the dust cover using the J00 screwdriver on the 6.35mm screws from the iFixit pro toolkit.

Step 3

The next step will require the opening tool.
Please carefully separate the back from the front completely. You will need to disconnect the small ribbon cable on the inside before completely removing the back. Otherwise you may end up hurting the ribbons on the inside.
While separating the back, carefully pry all the way around the back. You will hear popping noises while going around and this is a good sign.
Upon removing the back panel you will need to slowly and carefully remove the ribbons connecting the hardware to access the needed parts to be repaired.

The next step will require the opening tool.

Please carefully separate the back from the front completely. You will need to disconnect the small ribbon cable on the inside before completely removing the back. Otherwise you may end up hurting the ribbons on the inside.

While separating the back, carefully pry all the way around the back. You will hear popping noises while going around and this is a good sign.

Upon removing the back panel you will need to slowly and carefully remove the ribbons connecting the hardware to access the needed parts to be repaired.

Step 4

Once the ribbons have been removed, then the back is fully removed and you can access the hardware within.

Once the ribbons have been removed, then the back is fully removed and you can access the hardware within.

Step 5

              Motherboard

First you will want to remove the black casing holding the motherboard in.
Remove the two screws that are holding the casing down. These will be 6.35 mm screws that are to be removed using the J00 bit from the iFixit pro toolkit.
Once the screws are removed, carefully lift the case out of the system.

First you will want to remove the black casing holding the motherboard in.

Remove the two screws that are holding the casing down. These will be 6.35 mm screws that are to be removed using the J00 bit from the iFixit pro toolkit.

Once the screws are removed, carefully lift the case out of the system.

Step 6

Next remove the two bottom 6.35 mm screws using the J00 bit from the iFixit pro toolkit.
Now you will be able to gently remove the bottom casing.

Next remove the two bottom 6.35 mm screws using the J00 bit from the iFixit pro toolkit.

Now you will be able to gently remove the bottom casing.

Step 7

Next you must remove the two ribbon cables connecting the motherboard to other hardware parts. Please be careful. The third ribbon on the bottom is a camera that also needs to be carefully removed.

Next you must remove the two ribbon cables connecting the motherboard to other hardware parts. Please be careful. The third ribbon on the bottom is a camera that also needs to be carefully removed.

Step 8

Now gently lift the motherboard up, as there will be a ribbon that still needs to be removed.
Carefully remove the last ribbon, from the hardware and not the motherboard.
The motherboard can be successfully removed.
Any repairs or replaces will be doable now.

Now gently lift the motherboard up, as there will be a ribbon that still needs to be removed.

Carefully remove the last ribbon, from the hardware and not the motherboard.

The motherboard can be successfully removed.

Any repairs or replaces will be doable now.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 2 other contributors

                    Daniel Woodard

Member since: 08/22/2017

2,401 Reputation

                                      7 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges

Team

                       Arkansas State University, Team S1-G2, Chamberlain Fall 2017                        

                                                  Member of Arkansas State University, Team S1-G2, Chamberlain Fall 2017 



                    ARSU-CHAMBERLAIN-F17S1G2                     


                                            4 Members                     


                                            26 Guides authored

Raymond Depardieu - Dec 3, 2022

bonjour ma ps vita slim

batterie changé et la console a du mal a demarré quand elle s’allume comme si c’est comme elle a pas de batterie se remet a zero et apres on lance un jeu elle s’éteint et quand elle redémarre remettre heure c’est quoi le probleme

merci

Introduction#

What you need#

Team#

Introduction

What you need

Team