Difficulty

Moderate

Steps

6

Time Required

                          5 minutes

Sections

2

  • Battery
  • 1 step
  • Casing
  • 5 steps

Flags

1

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

  • BackPSP 300x

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Place the PSP face down and locate the battery cover on the left side of the device.
  • Lift and remove the battery cover to reveal the battery.
  • Remove the battery.

Place the PSP face down and locate the battery cover on the left side of the device.

Lift and remove the battery cover to reveal the battery.

Remove the battery.

1024

Step 2

              Casing
  • Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

Step 3

  • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.
  • Two are located behind the battery’s warranty sticker.
  • Two are located on the right side of the PSP.

Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

Two are located behind the battery’s warranty sticker.

Two are located on the right side of the PSP.

Step 4

  • Next, unscrew the two screws located at the top of the PSP.

Next, unscrew the two screws located at the top of the PSP.

Step 5

  • Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).

Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).

Step 6

  • Slide the spudger in between the outer casing of the PSP, beginning at the “R” shoulder button, and gently pry off the casing.
  • Remove the front casing completely.

Slide the spudger in between the outer casing of the PSP, beginning at the “R” shoulder button, and gently pry off the casing.


Remove the front casing completely.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      22 other people completed this guide.

Author

                                      with 15 other contributors 


                    kbrunner

Member since: 11/05/2009

57 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 19-2, Maness Fall 2009                        

                                                  Member of Cal Poly, Team 19-2, Maness Fall 2009 



                    CPSU-MANESS-F09S19G2                     


                                            3 Members                     


                                            9 Guides authored