Difficulty
Easy
Steps
6
Time Required
Suggest a time??
Sections
2
- Battery
- 1 step
- Front Case
- 5 steps
Flags
0
BackPSP 300xc
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Press the button securing the battery door to the PSP 300xc, and lift the battery door off.
- Lift the battery out of the PSP.
Press the button securing the battery door to the PSP 300xc, and lift the battery door off.
Lift the battery out of the PSP.
1024
Step 2
Front Case
- Use a spudger or your fingernail to remove the warranty sticker stuck to the inside of the battery tray
Use a spudger or your fingernail to remove the warranty sticker stuck to the inside of the battery tray
Step 3
- Remove four Phillips screws from the back of the PSP.
Remove four Phillips screws from the back of the PSP.
Step 4
- Remove two Phillips screws from the top of the PSP.
Remove two Phillips screws from the top of the PSP.
Step 5
- Remove a single screw from the bottom edge of the PSP.
Remove a single screw from the bottom edge of the PSP.
Step 6
- Insert a spudger between the front case and PSP, and slide the spudger along the perimeter of the front case to remove it.
Insert a spudger between the front case and PSP, and slide the spudger along the perimeter of the front case to remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Matthew Newsom
Member since: 01/05/2010
37,896 Reputation
67 Guides authored
Badges:
47
+44 more badges
