Difficulty
Moderate
Steps
22
Time Required
Suggest a time??
Sections
1
- Display Screen
- 22 steps
Flags
4
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Step Trimmer
This guide has unnecessary steps. Trim them to be more concise!
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackPyrus PY21S03211
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Display Screen
- Turn the video camera upside down so the bottom of the device is visible.
Turn the video camera upside down so the bottom of the device is visible.
1024
Step 2
- Pull back the bottom tab to reveal the battery compartment.
Pull back the bottom tab to reveal the battery compartment.
Step 3
- Pull back tab that is holding in the battery in place and remove the battery from the device.
Pull back tab that is holding in the battery in place and remove the battery from the device.
Step 4
- Open up the display screen.
Open up the display screen.
Step 5
- Use tweezers to carefully peel off the circle stickers, revealing the 4mm screws.
Use tweezers to carefully peel off the circle stickers, revealing the 4mm screws.
Step 6
- Use a 00 screwdriver to remove all six 4mm screws from the side of the device.
Use a 00 screwdriver to remove all six 4mm screws from the side of the device.
Step 7
- Use a plastic pick to pry off the side face of the device and carefully remove the side face.
Use a plastic pick to pry off the side face of the device and carefully remove the side face.
Step 8
- Carefully open the side face. Keep the side face close to the body of the device to avoid pulling on the white wires.
Carefully open the side face. Keep the side face close to the body of the device to avoid pulling on the white wires.
Step 9
- To remove the side face entirely, find the large white connector and flip open the grey lip with tweezers. Gently remove white connector.
To remove the side face entirely, find the large white connector and flip open the grey lip with tweezers. Gently remove white connector.
Step 10
- Put the device body to the side and keep the display screen side in front of you.
Put the device body to the side and keep the display screen side in front of you.
Step 11
- Remove the four silver 4mm screw from the back side of the side face.
Remove the four silver 4mm screw from the back side of the side face.
Step 12
- Use tweezers to pry the shiny black plastic corner piece from the side face.
Use tweezers to pry the shiny black plastic corner piece from the side face.
Step 13
- Twist the screen to the side to reveal two black 4mm screws.
Twist the screen to the side to reveal two black 4mm screws.
Step 14
- Remove screws from both sides of the screen.
Remove screws from both sides of the screen.
Step 15
- Use a plastic pick to pry off the backside of the screen.
Use a plastic pick to pry off the backside of the screen.
Step 16
- Find the large white connector and flip open the grey lip with tweezers. Gently remove the white connector.
Find the large white connector and flip open the grey lip with tweezers. Gently remove the white connector.
Step 17
- Find two 4mm silver screws at the base of the screen and remove them.
Find two 4mm silver screws at the base of the screen and remove them.
Step 18
- Use tweezers to flip open the grey lip and gently remove the gold transparent connector.
Use tweezers to flip open the grey lip and gently remove the gold transparent connector.
Step 19
- Find two 4mm black screws at the top of the display screen and remove them.
Find two 4mm black screws at the top of the display screen and remove them.
Step 20
- Remove green board.
Remove green board.
Step 21
- Remove the white display screen with your hands.
Remove the white display screen with your hands.
Step 22
- Insert replacement screen.
Insert replacement screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Danielle Hadaway
Member since: 03/31/2016
255 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
Eastern Washington University, Team 1-5, Giguere Spring 2016
Member of Eastern Washington University, Team 1-5, Giguere Spring 2016
EWU-GIGUERE-S16S1G5
3 Members
3 Guides authored
