Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
3
- Battery
- 3 steps
- Back Panel
- 2 steps
- Antennas
- 3 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackQualcomm Snapdragon 800 Mobile Development Platform Tablet
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Locate your device.
- Flip device onto its back.
Locate your device.
Flip device onto its back.
1024
Step 2
- Remove the tablet’s back cover.
Remove the tablet’s back cover.
Step 3
- Locate the battery and remove it.
- If you wish to replace the battery you can do so here.
Locate the battery and remove it.
If you wish to replace the battery you can do so here.
Step 4
Back Panel
- Use the Phillips PH1 screwdriver to unscrew the five 4x2.5mm screws that hold the back cover.
Use the Phillips PH1 screwdriver to unscrew the five 4x2.5mm screws that hold the back cover.
Step 5
- Pop out the back cover.
Pop out the back cover.
Step 6
Antennas
- After removing the panel and the battery, your tablet should look like this.
After removing the panel and the battery, your tablet should look like this.
Step 7
- Locate the tablet’s antennas.
- Remove the two 3x2.5mm screws holding them down.
Locate the tablet’s antennas.
Remove the two 3x2.5mm screws holding them down.
Step 8
- Remove antennas and replace them as needed.
Remove antennas and replace them as needed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Omar
Member since: 09/25/2017
261 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
University of North Texas, Team S2-G6, Thompson Fall 2017
Member of University of North Texas, Team S2-G6, Thompson Fall 2017
UNT-THOMPSON-F17S2G6
3 Members
5 Guides authored
