Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
1
- Pinion Gear
- 6 steps
Flags
0
BackFishing Tackle
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
No outside tools are needed for the replacement process.
Choking hazard with small children present with small pieces.
Step 1
Pinion Gear
- Unscrew by turning the cap counter-clockwise until it is separated from the spinning reel.
Unscrew by turning the cap counter-clockwise until it is separated from the spinning reel.
1024
Step 2
- Remove the spool line completely by pulling it away from the reel body.
Remove the spool line completely by pulling it away from the reel body.
Step 3
- Remove the gear by pulling it up and off of the pinion.
- Replace the pinion gear with your new one by aligning the shape of the gear opening and the pinion.
Remove the gear by pulling it up and off of the pinion.
Replace the pinion gear with your new one by aligning the shape of the gear opening and the pinion.
Step 4
- Place the spool back onto the pinion.
- Ensure that the spool is fitted properly.
Place the spool back onto the pinion.
Ensure that the spool is fitted properly.
Step 5
- Place the spool release and drag adjustment piece back onto the top of the pinion.
Place the spool release and drag adjustment piece back onto the top of the pinion.
Step 6
- Screw the spool release and drag adjustment back into place in a clockwise direction until desired tension is achieved.
Screw the spool release and drag adjustment back into place in a clockwise direction until desired tension is achieved.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Nicholas Lynch
Member since: 02/22/2022
133 Reputation
1 Guide authored
Badges:
2
Team
University of North Texas, Team 1-6, Raign Spring 2022
Member of University of North Texas, Team 1-6, Raign Spring 2022
UNT-RAIGN-S22S1G6
1 Member
1 Guide authored
