Difficulty
Moderate
Steps
4
Time Required
5 minutes
Sections
2
- Strap
- 2 steps
- Back Panel
- 2 steps
Flags
0
BackQuiksilver The Fifty50
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Strap
- Place the watch (face down) on a solid surface.
- Carefully use the screwdriver and push in one side of the strap.
- Slowly remove the strap by pushing back one of the hidden metallic holders for the strap.
- If you are having difficulty trying to take off the strap, feel free to use a 3.5 flat head screw driver, or any kind of tool that make this step easier.
Place the watch (face down) on a solid surface.
Carefully use the screwdriver and push in one side of the strap.
Slowly remove the strap by pushing back one of the hidden metallic holders for the strap.
If you are having difficulty trying to take off the strap, feel free to use a 3.5 flat head screw driver, or any kind of tool that make this step easier.
1024
Step 2
- Gently pull the pin out of the strap.
- Carefully handle the small metallic holder, as they are sharp and may be difficult to locate if lost.
Gently pull the pin out of the strap.
Carefully handle the small metallic holder, as they are sharp and may be difficult to locate if lost.
Step 3
Back Panel
- Remove the four 1.1 mm screws holding the back panel in place using the Phillips #00 screwdriver.
Remove the four 1.1 mm screws holding the back panel in place using the Phillips #00 screwdriver.
Step 4
- Carefully separate the panel off of the watch.
- Careful not to lose the four 1.1 mm screw or else the back panel will not be able to put back.
Carefully separate the panel off of the watch.
Careful not to lose the four 1.1 mm screw or else the back panel will not be able to put back.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Sue Giske
Member since: 07/16/2019
622 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
UW Tacoma, Team S1-G4, Liner Summer 2019
Member of UW Tacoma, Team S1-G4, Liner Summer 2019
UWT-LINER-SU19S1G4
5 Members
5 Guides authored