Raleigh M20 Handlebars Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          30 - 45 minutes            

Sections

1

• Handlebars
• 4 steps

Flags

2

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackRaleigh M20

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Handlebars               

• Strip all the accessories from your old handlebars. (reflectors, mirrors, etc…)
• Using a 3/8" Allen wrench, loosen the nuts that hold the brake controls and gear shifters.

Strip all the accessories from your old handlebars. (reflectors, mirrors, etc…)

Using a 3/8" Allen wrench, loosen the nuts that hold the brake controls and gear shifters.

1024

Step 2

• Place an Allen wrench (size doesn’t matter) under the bike grip.
• Twist the grip back and forth while pulling on the Allen wrench to remove the grip.

Place an Allen wrench (size doesn’t matter) under the bike grip.

Twist the grip back and forth while pulling on the Allen wrench to remove the grip.

Step 3

• Slide off the gear shifters.
• Slide off the brake controls.

Slide off the gear shifters.

Slide off the brake controls.

Step 4

• Loosen the central nut on the faceplate that connects the bars to the steering column. If the bars are secured by a faceplate with a detachable top, loosen the nuts on the faceplate and remove.
• Lift the handlebars from the bike frame.
• Move the bars until they’re in the correct position for your stance. Tighten the faceplate nuts with a 3/8" Allen wrench to firmly secure the handlebars in place.
• Sit on the bike and make final adjustments to the positioning of the brakes and gears.

Loosen the central nut on the faceplate that connects the bars to the steering column. If the bars are secured by a faceplate with a detachable top, loosen the nuts on the faceplate and remove.

Lift the handlebars from the bike frame.

Move the bars until they’re in the correct position for your stance. Tighten the faceplate nuts with a 3/8" Allen wrench to firmly secure the handlebars in place.

Sit on the bike and make final adjustments to the positioning of the brakes and gears.

To reinstall the handlebars, complete these steps in reverse order. If there is a problem with the alignment, return to the handlebar repair guide and repeat step 4.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Jon Ribera                     

Member since: 09/26/2012

69 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team 7-49, Forte Fall 2012                        

                                                  Member of Cal Poly, Team 7-49, Forte Fall 2012 



                    CPSU-FORTE-F12S7G49                     


                                            5 Members                     


                                            5 Guides authored