Difficulty
Moderate
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Battery
- 4 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackRazer Barracuda X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the cushion by pulling it off from the edge and out from the grooves.
- Continue to pull the cushion away from the speaker until the cushion is fully separated.
Remove the cushion by pulling it off from the edge and out from the grooves.
Continue to pull the cushion away from the speaker until the cushion is fully separated.
1024
Step 2
- Remove the four 6 mm Phillips #1 screws from the left side of the speaker casing.
Remove the four 6 mm Phillips #1 screws from the left side of the speaker casing.
Step 3
- Gently pull the speaker casing away from the shell.
- Place it face down to access the battery.
Gently pull the speaker casing away from the shell.
Place it face down to access the battery.
Step 4
- Unplug the battery from the socket.
- Use a spudger to gently lift the battery up.
- Remove the battery.
Unplug the battery from the socket.
Use a spudger to gently lift the battery up.
Remove the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Micah Ortiz
Member since: 10/26/2022
181 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team 2-3, Petersen Fall 2022
Member of UMass Dartmouth, Team 2-3, Petersen Fall 2022
UMASSD-PETERSEN-F22S2G3
4 Members
4 Guides authored
