Difficulty

Moderate

Steps

6

Time Required

                          5 - 10 minutes

Sections

1

  • Motherboard
  • 6 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackRazer Barracuda X

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Motherboard
  • Remove the cushion by pulling it off from the edge and out from the grooves, Continue to pull the cushion away from the speaker until the cushion is fully separated.

Remove the cushion by pulling it off from the edge and out from the grooves, Continue to pull the cushion away from the speaker until the cushion is fully separated.

1024

Step 2

  • Using a Phillips #0 screwdriver to unscrew the four screws that attach the two pieces of the right speaker together.
  • Gently lift the plastic plate away from the housing, with care not to damage the connected wire.

Using a Phillips #0 screwdriver to unscrew the four screws that attach the two pieces of the right speaker together.

Gently lift the plastic plate away from the housing, with care not to damage the connected wire.

Step 3

  • Using a Phillips #0 screwdriver, remove the single screw attaching the volume spinner to the motherboard.
  • Remove the spinner.

Using a Phillips #0 screwdriver, remove the single screw attaching the volume spinner to the motherboard.

Remove the spinner.

Step 4

  • Remove the Phillips #0 screws securing the I/O board from the bottom shell of the right speaker.

Remove the Phillips #0 screws securing the I/O board from the bottom shell of the right speaker.

Step 5

  • To fully remove the I/O board from the right speaker, use tweezers to unplug the ribbon cable attaching the I/O board to the main motherboard.

To fully remove the I/O board from the right speaker, use tweezers to unplug the ribbon cable attaching the I/O board to the main motherboard.

Step 6

  • Using the same Philips #0 screwdriver, remove the four screws attaching the motherboard to the plastic housing. Once those screws are removed, remove the main motherboard and replace it.

Using the same Philips #0 screwdriver, remove the four screws attaching the motherboard to the plastic housing. Once those screws are removed, remove the main motherboard and replace it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Josiah Cassidy

Member since: 10/26/2022

235 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team 2-3, Petersen Fall 2022                        

                                                  Member of UMass Dartmouth, Team 2-3, Petersen Fall 2022 



                    UMASSD-PETERSEN-F22S2G3                     


                                            4 Members                     


                                            4 Guides authored