Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

  • Razer Blackwidow Elite Disassembly
  • 4 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackRazer Blackwidow Elite

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Take off the keycaps
  • You will start by taking off the key caps. This can easily be done by simply pulling the smaller ones, but be careful with the “longer” keys, since they have a metal bar which you don’t want to break or bend. The keys that are special are showed with the red rings.

You will start by taking off the key caps. This can easily be done by simply pulling the smaller ones, but be careful with the “longer” keys, since they have a metal bar which you don’t want to break or bend. The keys that are special are showed with the red rings.

1024

Step 2

              Removing the two rubber feet before screws
  • Take off the two rubber feet on the far end of the keyboard (the side that is normally turned towards your monitor) This can be done with your fingers, but I recommend using a screwdriver with a flat head.

Take off the two rubber feet on the far end of the keyboard (the side that is normally turned towards your monitor) This can be done with your fingers, but I recommend using a screwdriver with a flat head.

Step 3

              Unscrew the two bottom screws
  • Now you will have to unscrew the two bottom screws, this is done with a small philips screwdriver. I could not get out the screw positioned towards the escape button, but that did not matter. Notice how the screws differ from each other, this is important for reassembly.

Now you will have to unscrew the two bottom screws, this is done with a small philips screwdriver. I could not get out the screw positioned towards the escape button, but that did not matter. Notice how the screws differ from each other, this is important for reassembly.

Step 4

              Unscrew the screws under the keycaps
  • Now you will have to unscrew the screws sitting underneath the keycaps. This is again done with a small philips screwdriver. There are 14 screws on the front, positioning does not matter for reassembly as these are the same.

Now you will have to unscrew the screws sitting underneath the keycaps. This is again done with a small philips screwdriver. There are 14 screws on the front, positioning does not matter for reassembly as these are the same.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Kristoffer Klank

Member since: 02/05/2021

109 Reputation

                                      1 Guide authored                  



                       Badges:
                       1