Razer Blade Stealth 2016 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          10 minutes            

Sections

1

• Battery
• 3 steps

Flags

0

• BackRazer Blade Stealth 12.5 (2016)

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Please be mindful about recycling old batteries. We advise you to follow state/local recycling procedures when disposing old batteries.

PLEASE MAKE SURE TO TURN OFF POWER TO DEVICE PRIOR TO STEP 1.

What you need

Step 1

              Battery               

• Use a Torx screwdriver to remove the eight 3 mm screws on the back case.
• Remove the rear cover by prying up lightly starting in one of the corners.

Use a Torx screwdriver to remove the eight 3 mm screws on the back case.

Remove the rear cover by prying up lightly starting in one of the corners.

1024

Step 2

• Use a Phillips screwdriver to remove the six screws securing the battery.

Use a Phillips screwdriver to remove the six screws securing the battery.

Step 3

• Unplug the battery connector from the motherboard.
• Remove the battery from the device.

Unplug the battery connector from the motherboard.

Remove the battery from the device.

To reassemble your device, follow these instructions in reverse order, starting with the installation of your NEW battery.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.                                             

Author

                                      with 9 other contributors 

                    Lindsay Grant                     

Member since: 10/10/2019

403 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team S1-G4, Leahy Fall 2019                        

                                                  Member of USF Tampa, Team S1-G4, Leahy Fall 2019 



                    USFT-LEAHY-F19S1G4                     


                                            4 Members                     


                                            5 Guides authored                     

Ralf Fischer - Aug 27, 2020

Reply

josealderat - Nov 13, 2020

Reply

What kind of adhesive tape is on the battery that is holding it down.

Bryce Frederick - Mar 15, 2022

Reply

Lindsay, I replaced the battery as per your guidance and it showed 20% charge at first and turned on without needing to be plugged in. SO I plugged it in to charge the battery which is now at 93% and holding. However, if I unplug the computer it automatically shuts off! Any ideas? I have tried most of the trouble shooting on the web with no luck. Thanks!

Bryce

erichart1000 - Aug 14, 2022

I am having the exact same problem. It worked as soon as I replaced the battery. I charged it over night and the battery does not work at all. The computer only turns on when it is plugged in.