Difficulty
Difficult
Steps
9
Time Required
30 minutes
Sections
2
- Battery
- 3 steps
- RAM
- 6 steps
Flags
0
BackRazer Blade Stealth 12.5 (2016)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
WARNING: The soldering iron gets very hot, so be cautious while using it.
What you need
Step 1
Battery
- Use a Torx screwdriver to remove the eight 3 mm screws on the back case.
- Remove the rear cover by prying up lightly starting in one of the corners.
Use a Torx screwdriver to remove the eight 3 mm screws on the back case.
Remove the rear cover by prying up lightly starting in one of the corners.
1024
Step 2
- Use a Phillips screwdriver to remove the six screws securing the battery.
Use a Phillips screwdriver to remove the six screws securing the battery.
Step 3
- Unplug the battery connector from the motherboard.
- Remove the battery from the device.
Unplug the battery connector from the motherboard.
Remove the battery from the device.
Step 4
RAM
- Remove the red and black cables that are attached to the motherboard.
Remove the red and black cables that are attached to the motherboard.
Step 5
- Remove the four 3.4 mm screws around the black square using a T4 Torx screwdriver.
- Remove the heat sink.
Remove the four 3.4 mm screws around the black square using a T4 Torx screwdriver.
Remove the heat sink.
Step 6
- Remove the 3.4 mm screws to the cooling fans using a T4 Torx screwdriver.
- Remove the cooling fans.
Remove the 3.4 mm screws to the cooling fans using a T4 Torx screwdriver.
Remove the cooling fans.
Step 7
- Remove the 3.4 mm screws on the perimeter of the motherboard using a T4 Torx screwdriver.
Remove the 3.4 mm screws on the perimeter of the motherboard using a T4 Torx screwdriver.
Step 8
- Remove the motherboard.
Remove the motherboard.
Step 9
- Desolder the pins on the motherboard to remove the RAM.
- WARNING: Be careful while using the soldering iron.
Desolder the pins on the motherboard to remove the RAM.
WARNING: Be careful while using the soldering iron.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
SadieGomez
Member since: 09/21/2021
352 Reputation
3 Guides authored
Badges:
5
+2 more badges
Team
The Citadel Military College of South Carolina, Team 3-19, Eggleston Fall 2021
Member of The Citadel Military College of South Carolina, Team 3-19, Eggleston Fall 2021
CMCSC-EGGLESTON-F21S3G19
3 Members
3 Guides authored
