Difficulty

Moderate

Steps

8

Time Required

                          20 minutes

Sections

2

  • Battery
  • 5 steps
  • Speaker
  • 3 steps

Flags

0

  • BackRazer Blade Stealth 13 (2017)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.
  • Use a Torx T5 screwdriver to remove the eight, 3mm screws on the bottom cover of the laptop.
  • Whenever you remove screws from the device, remember to save and label them.

Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.

Use a Torx T5 screwdriver to remove the eight, 3mm screws on the bottom cover of the laptop.

Whenever you remove screws from the device, remember to save and label them.

1024

Step 2

  • Remove the bottom cover of the laptop by sliding it away from the hinge.
  • Do not force the cover up!

Remove the bottom cover of the laptop by sliding it away from the hinge.

Do not force the cover up!

Step 3

  • Use your fingernail to pry up and disconnect the battery from the motherboard.

Use your fingernail to pry up and disconnect the battery from the motherboard.

Step 4

  • Use a Phillips #00 screwdriver to remove the six, 5mm screws securing the battery.

Use a Phillips #00 screwdriver to remove the six, 5mm screws securing the battery.

Step 5

  • Remove any tape attached to the battery.
  • Use the plastic spudger to pry out the battery.

Remove any tape attached to the battery.

Use the plastic spudger to pry out the battery.

Step 6

              Speaker
  • Use tweezers to disconnect the red and black speaker cables by lifting up on the pin-header.
  • The same process is used for both speaker connections.
  • Do not pull horizontally on the wires!

Use tweezers to disconnect the red and black speaker cables by lifting up on the pin-header.

The same process is used for both speaker connections.

Do not pull horizontally on the wires!

Step 7

  • Use a Phillips #00 to remove the two, 4mm screws on each speaker.

Use a Phillips #00 to remove the two, 4mm screws on each speaker.

Step 8

  • Use a plastic spudger to pry the speaker(s) away from the chassis.
  • The speakers are glued to the chassis, making them difficult to remove.
  • The same process is used for both speakers.

Use a plastic spudger to pry the speaker(s) away from the chassis.

The speakers are glued to the chassis, making them difficult to remove.

The same process is used for both speakers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Helene Willits

Member since: 10/10/2019

718 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team S11-G3, Regan Fall 2019                        

                                                  Member of Cal Poly, Team S11-G3, Regan Fall 2019 



                    CPSU-REGAN-F19S11G3                     


                                            4 Members                     


                                            7 Guides authored