Difficulty

Moderate

Steps

11

Time Required

                          1 hour

Sections

4

  • Keycaps
  • 3 steps
  • Chassis
  • 5 steps
  • Key Switch
  • 1 step
  • Mainboard
  • 2 steps

Flags

1

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackRazer Huntsman Tournament Edition

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The Razer Huntsman Tournament Edition is a tenkeyless mechanical keyboard.

You must know how to remove the case and switches in order to complete this guide.

What you need

Step 1

              Keycaps
  • Place the unplugged keyboard on a flat, clean surface appropriate for working on.

Place the unplugged keyboard on a flat, clean surface appropriate for working on.

1024

Step 2

  • Grip the keycap with your keycap puller.
  • You can remove keycaps with your fingers if you don’t have a puller, but the adjacent keycaps must be removed first for sufficient grip.

Grip the keycap with your keycap puller.

You can remove keycaps with your fingers if you don’t have a puller, but the adjacent keycaps must be removed first for sufficient grip.

Step 3

  • Pull with an upwards force to remove the keycap.
  • Take a moment to clean the area that was previously obscured if it’s dirty.
  • Use gentle force so as not to damage the stabilizers.

Pull with an upwards force to remove the keycap.

Take a moment to clean the area that was previously obscured if it’s dirty.

Use gentle force so as not to damage the stabilizers.

Step 4

              Chassis
  • Remove all of the keycaps with a keycap puller.

Remove all of the keycaps with a keycap puller.

Step 5

  • Unscrew the thirteen 6.5 mm screws, using the Phillips #0 screwdriver, that are located in the front panel.

Unscrew the thirteen 6.5 mm screws, using the Phillips #0 screwdriver, that are located in the front panel.

Step 6

  • Use an opening tool to pry open the chassis.
  • Be careful not to use excessive force during this step so the plastic doesn’t warp or break.

Use an opening tool to pry open the chassis.

Be careful not to use excessive force during this step so the plastic doesn’t warp or break.

Step 7

  • Gently lift the front panel off.
  • The front panel should be connected to the USB board. Do not tug the panel off as this may damage other parts.

Gently lift the front panel off.

The front panel should be connected to the USB board. Do not tug the panel off as this may damage other parts.

Step 8

  • Disconnect the internal cable.

Disconnect the internal cable.

Step 9

              Key Switch
  • Gently push the key switch off of the mainboard with your thumb.

Gently push the key switch off of the mainboard with your thumb.

Step 10

              Mainboard
  • Remove all of the switches.

Remove all of the switches.

Step 11

  • Replace the motherboard.
  • Do this in a gentle manner

Replace the motherboard.

Do this in a gentle manner

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Joseph O'Dowd

Member since: 10/25/2022

356 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UMass Dartmouth, Team 4-3, Sinclaire Fall 2022                        

                                                  Member of UMass Dartmouth, Team 4-3, Sinclaire Fall 2022 



                    UMASSD-SINCLAIRE-F22S4G3                     


                                            5 Members                     


                                            7 Guides authored