Difficulty

Moderate

Steps

11

Time Required

                          1 hour

Sections

3

  • Keycaps
  • 3 steps
  • Chassis
  • 5 steps
  • Port
  • 3 steps

Flags

0

  • BackRazer Huntsman Tournament Edition

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The Razer Huntsman Tournament Edition is a tenkeyless mechanical keyboard. Its USB port is easily swappable, being held in by a screw and a cable.

You must know how to remove the back of the keyboard before beginning this guide.

What you need

Step 1

              Keycaps
  • Place the unplugged keyboard on a flat, clean surface appropriate for working on.

Place the unplugged keyboard on a flat, clean surface appropriate for working on.

1024

Step 2

  • Grip the keycap with your keycap puller.
  • You can remove keycaps with your fingers if you don’t have a puller, but the adjacent keycaps must be removed first for sufficient grip.

Grip the keycap with your keycap puller.

You can remove keycaps with your fingers if you don’t have a puller, but the adjacent keycaps must be removed first for sufficient grip.

Step 3

  • Pull with an upwards force to remove the keycap.
  • Take a moment to clean the area that was previously obscured if it’s dirty.
  • Use gentle force so as not to damage the stabilizers.

Pull with an upwards force to remove the keycap.

Take a moment to clean the area that was previously obscured if it’s dirty.

Use gentle force so as not to damage the stabilizers.

Step 4

              Chassis
  • Remove all of the keycaps with a keycap puller.

Remove all of the keycaps with a keycap puller.

Step 5

  • Unscrew the thirteen 6.5 mm screws, using the Phillips #0 screwdriver, that are located in the front panel.

Unscrew the thirteen 6.5 mm screws, using the Phillips #0 screwdriver, that are located in the front panel.

Step 6

  • Use an opening tool to pry open the chassis.
  • Be careful not to use excessive force during this step so the plastic doesn’t warp or break.

Use an opening tool to pry open the chassis.

Be careful not to use excessive force during this step so the plastic doesn’t warp or break.

Step 7

  • Gently lift the front panel off.
  • The front panel should be connected to the USB board. Do not tug the panel off as this may damage other parts.

Gently lift the front panel off.

The front panel should be connected to the USB board. Do not tug the panel off as this may damage other parts.

Step 8

  • Disconnect the internal cable.

Disconnect the internal cable.

Step 9

              Port
  • Unscrew the board with the port.
  • It should be located on the upper left, held in by two 6.5mm Phillips #0 screws.
  • Move the cable out of the way for the second screw

Unscrew the board with the port.

It should be located on the upper left, held in by two 6.5mm Phillips #0 screws.

Move the cable out of the way for the second screw

Step 10

  • Detach the internal cable from the USB board.
  • Do this carefully.

Detach the internal cable from the USB board.

Do this carefully.

Step 11

  • Remove the USB board.

Remove the USB board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Joseph O'Dowd

Member since: 10/25/2022

356 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UMass Dartmouth, Team 4-3, Sinclaire Fall 2022                        

                                                  Member of UMass Dartmouth, Team 4-3, Sinclaire Fall 2022 



                    UMASSD-SINCLAIRE-F22S4G3                     


                                            5 Members                     


                                            7 Guides authored