Razer Kraken Ultimate Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          8 - 20 minutes            

Sections

2

• Ear Pads
• 3 steps
• Speaker
• 3 steps

Flags

1

Missed a Step

Oops! This guide is currently missing some important steps.

• BackRazer Kraken Ultimate

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Make sure you have the replacement pieces before preforming this task, make sure you following the guides before this one correctly. this guide will help you improve your speakers on the headset.

What you need

Step 1

              Ear Pads               

• Grab the ear piece from one of the sides and lightly pull it outwards.
• Ideally, do not pull the ear piece directly away from the speaker; it may damage the piece.

Grab the ear piece from one of the sides and lightly pull it outwards.

Ideally, do not pull the ear piece directly away from the speaker; it may damage the piece.

1024

Step 2

• Once you have taken off one side, you can then remove the whole piece by slowly prying the pad away from the headphones.

Once you have taken off one side, you can then remove the whole piece by slowly prying the pad away from the headphones.

Step 3

• Repeat steps on the other side.

Repeat steps on the other side.

Step 4

              Speaker               

• Remove the four 10 mm Phillips #00 screws securing the right speaker.
• Be sure the device is unplugged before attempting to remove any of the screws.

Remove the four 10 mm Phillips #00 screws securing the right speaker.

Be sure the device is unplugged before attempting to remove any of the screws.

Step 5

• Remove the 10 mm Phillips #00 screws securing the left speaker.
• Note that one of the screws is hidden behind the product information sticker. Use your screw driver to punch a hole in the sticker.

Remove the 10 mm Phillips #00 screws securing the left speaker.

Note that one of the screws is hidden behind the product information sticker. Use your screw driver to punch a hole in the sticker.

Step 6

• To fully detach the speakers cut the wires as close as possible to the connection point, leaving plenty of room to solder the new speaker on.

To fully detach the speakers cut the wires as close as possible to the connection point, leaving plenty of room to solder the new speaker on.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Alex Broggi                     

Member since: 10/24/2022

342 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       UMass Dartmouth, Team 1-4, Petersen Fall 2022                        

                                                  Member of UMass Dartmouth, Team 1-4, Petersen Fall 2022 



                    UMASSD-PETERSEN-F22S1G4                     


                                            5 Members                     


                                            6 Guides authored