Razer Megalodon Virtual 7 1 Surround Sound Usb Gaming Headset Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

• Speaker
• 3 steps

Flags

2

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackRazer Megalodon – Virtual 7.1 Surround Sound USB Gaming Headset

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Speaker               

• If the damaged speaker is in the left ear piece, remove the left ear cushion by rotating it counter clockwise (ear piece with microphone boom). For the right speaker, the right ear cushion must be turned clockwise to remove.
• For additional information on removing the ear cushions, reference the Ear Cushions replacement guide.

If the damaged speaker is in the left ear piece, remove the left ear cushion by rotating it counter clockwise (ear piece with microphone boom). For the right speaker, the right ear cushion must be turned clockwise to remove.

For additional information on removing the ear cushions, reference the Ear Cushions replacement guide.

1024

Step 2

• To get to the speaker you need to remove the six 5mm screws from the inner housing plate.
• After doing this you can pull the housing apart exposing the speaker.

To get to the speaker you need to remove the six 5mm screws from the inner housing plate.

After doing this you can pull the housing apart exposing the speaker.

Step 3

• Use a knife to cut the glue around the speaker that is holding it to the assembly.
• Once the glue is cut, pry the speaker out. Cut the wires at the base of the speaker and then replace them.
• A solder gun will be needed to solder the wires onto the new speaker.

Use a knife to cut the glue around the speaker that is holding it to the assembly.

Once the glue is cut, pry the speaker out. Cut the wires at the base of the speaker and then replace them.

A solder gun will be needed to solder the wires onto the new speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Kyle Schober                     

Member since: 02/24/2014

640 Reputation

                                      5 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       Michigan Tech, Team 5-8, Lauer Spring 2014                        

                                                  Member of Michigan Tech, Team 5-8, Lauer Spring 2014 



                    MTU-LAUER-S14S5G8                     


                                            3 Members                     


                                            13 Guides authored                     

Tom Van Aken - Jan 26, 2016

Reply

Great guide!!

What speaker do i need to buy, where can i buy it ?

thank you!

reginaldo1982 - Jan 18, 2019

Reply

Muito bom

https://rbshopping.com.br/

Muito bom o artigo