Razer Naga Expert Mmo Motherboard Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          15 minutes

Sections

Top Plastic Shell
4 steps
Scroll Wheel
5 steps
Motherboard
2 steps

Flags

BackRazer Naga Expert MMO
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Top Plastic Shell

Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.

Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.

1024

Step 2

Remove the four 7mm screws using a Phillips #00 screwdriver.

Remove the four 7mm screws using a Phillips #00 screwdriver.

Step 3

Gently remove the top plastic plate of the mouse.
Unplug the white cord from the circuit board.

Gently remove the top plastic plate of the mouse.

Unplug the white cord from the circuit board.

Step 4

Lightly pull the two plastic sides of the mouse to remove them.

Lightly pull the two plastic sides of the mouse to remove them.

Step 5

              Scroll Wheel

Using a Phillips #00 screwdriver, remove the 5mm screw holding the scroll wheel in place.

Using a Phillips #00 screwdriver, remove the 5mm screw holding the scroll wheel in place.

Step 6

Unplug the cord that connects the scroll wheel to the motherboard.

Unplug the cord that connects the scroll wheel to the motherboard.

Step 7

Slide the chip out of the scroll wheel.

Slide the chip out of the scroll wheel.

Step 8

Gently wiggle the scroll wheel up and back to remove the scroll wheel from the mouse.
Use your fingers to simultaneously push the scroll wheel and its frame forward and pull back on the plastic tab directly behind the scroll wheel until it is loose.
Use your thumbs to pop the scroll wheel out from its plastic frame.

Gently wiggle the scroll wheel up and back to remove the scroll wheel from the mouse.

Use your fingers to simultaneously push the scroll wheel and its frame forward and pull back on the plastic tab directly behind the scroll wheel until it is loose.

Use your thumbs to pop the scroll wheel out from its plastic frame.

Step 9

Place the new scroll wheel in the mount.
Upon reassembly, be careful to ensure the silver box on the side of the wheel is placed into the frame with the tab facing downward so upon entry into the frame it fits into its slot.

Place the new scroll wheel in the mount.

Upon reassembly, be careful to ensure the silver box on the side of the wheel is placed into the frame with the tab facing downward so upon entry into the frame it fits into its slot.

Step 10

              Motherboard

Using a Phillips #00 screwdriver, remove all five 5mm screws that connect the motherboard to the main frame.

Using a Phillips #00 screwdriver, remove all five 5mm screws that connect the motherboard to the main frame.

Step 11

Place the new motherboard in the mouse.
When reassembling the mouse, place the loose plastic piece that holds the scroll wheel and wire in place into the rectangular slots in the circuit board.

Place the new motherboard in the mouse.

When reassembling the mouse, place the loose plastic piece that holds the scroll wheel and wire in place into the rectangular slots in the circuit board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Jacqueline Scalzo

Member since: 01/29/2018

253 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       University of Alabama, Team S1-G2, Bedsole Spring 2018                        

                                                  Member of University of Alabama, Team S1-G2, Bedsole Spring 2018 



                    UA-BEDSOLE-S18S1G2                     


                                            4 Members                     


                                            5 Guides authored

Sumona Florence - Sep 7, 2019

Surprised this is rated Difficult. :f

aldo serrano - Sep 15, 2019

Do you know where I can find the motherboard for the mouse?

David Mendo Diaz - Sep 19, 2019

Where can I get a replacement motherboard?

Introduction#

What you need#

Team#

Introduction

What you need

Team