Difficulty

Moderate

Steps

7

Time Required

                          8 minutes

Sections

2

  • Top Plastic Shell
  • 4 steps
  • Side Button Connection Strip
  • 3 steps

Flags

0

  • BackRazer Naga Expert MMO

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Top Plastic Shell
  • Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.

Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.

1024

Step 2

  • Remove the four 7mm screws using a Phillips #00 screwdriver.

Remove the four 7mm screws using a Phillips #00 screwdriver.

Step 3

  • Gently remove the top plastic plate of the mouse.
  • Unplug the white cord from the circuit board.

Gently remove the top plastic plate of the mouse.

Unplug the white cord from the circuit board.

Step 4

  • Lightly pull the two plastic sides of the mouse to remove them.

Lightly pull the two plastic sides of the mouse to remove them.

Step 5

              Side Button Connection Strip
  • Flip back the black plastic that holds the white connection strip in place on the side panel and the main panel.

Flip back the black plastic that holds the white connection strip in place on the side panel and the main panel.

Step 6

  • Gently remove the white connection strip at each end.

Gently remove the white connection strip at each end.

Step 7

  • Insert the blue striped ends into the white connection port on the mainframe as well as the frame with the buttons.

Insert the blue striped ends into the white connection port on the mainframe as well as the frame with the buttons.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Laura Rubisch

Member since: 01/29/2018

115 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       University of Alabama, Team S1-G2, Bedsole Spring 2018                        

                                                  Member of University of Alabama, Team S1-G2, Bedsole Spring 2018 



                    UA-BEDSOLE-S18S1G2                     


                                            4 Members                     


                                            5 Guides authored

Tsuki Yomi - Jan 10, 2020

Reply

What is the code for the connection strip and how many pins does it have?

Thank you for the guide.