Difficulty

Moderate

Steps

6

Time Required

                          20 minutes

Sections

1

  • Display Assembly
  • 6 steps

Flags

0

  • BackRazer Phone

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Display Assembly
  • Remove the plastic speaker grills by using the metal spudger to pry underneath the strips.
  • Peel off the plastic speaker grill to reveal the screws.
  • Heating up the plastic grills make them easier to remove.
  • Peeling off the plastic speaker grill will ruin the adhesive used to keep it in place. A new adhesive must be used to put the grill back on the device.

Remove the plastic speaker grills by using the metal spudger to pry underneath the strips.

Peel off the plastic speaker grill to reveal the screws.

Heating up the plastic grills make them easier to remove.

Peeling off the plastic speaker grill will ruin the adhesive used to keep it in place. A new adhesive must be used to put the grill back on the device.

1024

Step 2

  • Pry the top plastic grill off with the metal spudger and reveal the screws.

Pry the top plastic grill off with the metal spudger and reveal the screws.

Step 3

  • Remove five (two bottom, three top) 2.5 mm screws with the Phillips #000 screwdriver.
  • Remove five (four bottom, one top) 5.5 mm screws with the Torx Head T5 screwdriver.

Remove five (two bottom, three top) 2.5 mm screws with the Phillips #000 screwdriver.

Remove five (four bottom, one top) 5.5 mm screws with the Torx Head T5 screwdriver.

Step 4

  • Remove the display assembly by using the Jimmy to separate the assembly from the phone’s frame.
  • Lift the display assembly away from the other half of the phone.

Remove the display assembly by using the Jimmy to separate the assembly from the phone’s frame.

Lift the display assembly away from the other half of the phone.

Step 5

  • Remove one 2.5 mm screw holding down the metal bracket connector using the Phillips #000 screwdriver.
  • Peel back the metallic shielding over the connector using tweezers.
  • Remove the metal bracket connector.

Remove one 2.5 mm screw holding down the metal bracket connector using the Phillips #000 screwdriver.

Peel back the metallic shielding over the connector using tweezers.

Remove the metal bracket connector.

Step 6

  • Grab hold of the the screen ribbon with the tweezers and remove it from the rest of the phone to free the assembly display.

Grab hold of the the screen ribbon with the tweezers and remove it from the rest of the phone to free the assembly display.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      9 other people completed this guide.

Author

                                      with 2 other contributors 


                    Sebastian Barragan

Member since: 01/24/2019

396 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team S19-G6, White Winter 2019                        

                                                  Member of Cal Poly, Team S19-G6, White Winter 2019 



                    CPSU-WHITE-W19S19G6                     


                                            5 Members                     


                                            12 Guides authored

Vincent - May 10, 2019

Reply

“Peeling off the plastic speaker grill will ruin the adhesive used to keep it in place. A new adhesive must be used to put the grill back on the device.”

Any suggestions on what adhesive to use to replace the plastic speaker grills?

Lucano - Oct 18, 2020

Double sided tape.

baby_zhent17 - Nov 1, 2019

Reply

Sir, where can I order Razer Phone 1 LCD Assembly?

Search on eBay. Phones are often parted out there.

I almost forgot; when searching, your Razer Phone’s model number is RZ35-0215, code name: Cheryl.