Rca 10 Viking Pro Rct6K03W13 Backplate Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          5 minutes            

Sections

1

• Backplate
• 4 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackRCA 10 Viking Pro RCT6K03W13

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Backplate               

• Remove the three Phillips #00 screws at the bottom of the device.

Remove the three Phillips #00 screws at the bottom of the device.

1024

Step 2

• Remove the two Phillips #00 screws to the left and right of the keyboard connector.

Remove the two Phillips #00 screws to the left and right of the keyboard connector.

Step 3

• Pull on one of the bottom corners to begin to pull off the back plate.

Pull on one of the bottom corners to begin to pull off the back plate.

Step 4

• Work around the outside of the chassis, using the spudger to pry the backplate off.
• After doing this for about half the device, the backplate should pop right off.

Work around the outside of the chassis, using the spudger to pry the backplate off.

After doing this for about half the device, the backplate should pop right off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Ryan Wickett                     

Member since: 10/25/2019

632 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       UMass Dartmouth, Team S1-G8, O'Connell Fall 2019                        

                                                  Member of UMass Dartmouth, Team S1-G8, O'Connell Fall 2019 



                    UMASSD-O'CONNELL-F19S1G8                     


                                            3 Members                     


                                            4 Guides authored                     

william algara - Mar 3, 2021

Reply

muy bueno me sirvio