Rca Maven Pro 11 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Cover
2 steps
Battery
2 steps

Flags

BackRCA Maven Pro 11
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Cover

Remove all the 8 mm Phillips head screws on the side and back of the device.

Remove all the 8 mm Phillips head screws on the side and back of the device.

1024

Step 2

Pry off the cover by sticking a wedge in between the screen and the cover.
Be careful with the plastic because it can easily break.
Once the cover is partly removed, use your hands to take off the rest of the cover.

Pry off the cover by sticking a wedge in between the screen and the cover.

Be careful with the plastic because it can easily break.

Once the cover is partly removed, use your hands to take off the rest of the cover.

Step 3

              Battery

Pull out the pins circled in the picture.
These pins can be removed by hand. Just pull on them individually.

Pull out the pins circled in the picture.

These pins can be removed by hand. Just pull on them individually.

Step 4

Use the opening tools to peel the battery off of the panel.
The glue is located in the corners.
Do not bend or puncture the battery.

Use the opening tools to peel the battery off of the panel.

The glue is located in the corners.

Do not bend or puncture the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Brady Alexander Cristancho

Member since: 03/04/2019

396 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Purdue University Northwest, Team S4-G2, Hingst Spring 2019                        

                                                  Member of Purdue University Northwest, Team S4-G2, Hingst Spring 2019 



                    PNW-HINGST-S19S4G2                     


                                            4 Members                     


                                            5 Guides authored

Carol tyciak - Apr 20, 2020

My husband installed my new battery in my ex’s haven pro tablet and when we turned it on it said battery charger 65%. I then turned it back off to co time charging to 100% it when I checked in a few hours, the battery level dropped to 20% and I cannot get it to recharge. It is now completely dead and will not take a charge what should I do?

My husband installed a new battery into my RCA Maven Pro tablet and when we turned it on, it showed 65% battery life. I then turned it off to continue to charge to 100%. When I checked it in about 4 hours, it was down to 20% and now it is depleted completely and I can’t get it to recharge. What should I do now?

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team