Rca Maven Pro 11 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          20 minutes            

Sections

1

• Motherboard
• 6 steps

Flags

0

• BackRCA Maven Pro 11

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• Use a Phillip’s head screwdriver to unscrew the screws that secure the back cover in place. There are 6 screws in total (4 black, 2 silver).

Use a Phillip’s head screwdriver to unscrew the screws that secure the back cover in place. There are 6 screws in total (4 black, 2 silver).

1024

Step 2

• Using a prying tool to pry off the back cover of the tablet. To do this, insert the prying tool between the screen and the side of the tablet.
• Once the prying tool is inserted, run it along the edge of the tablet until the back cover pops off.

Using a prying tool to pry off the back cover of the tablet. To do this, insert the prying tool between the screen and the side of the tablet.

Once the prying tool is inserted, run it along the edge of the tablet until the back cover pops off.

Step 3

• Use a Phillips head screwdriver to unscrew the 4 black screws that secure the motherboard to the device.

Use a Phillips head screwdriver to unscrew the 4 black screws that secure the motherboard to the device.

Step 4

• On the long edge of the motherboard, remove all of the ribbon and bundled cables.
• The ZIF connections are removed by lifting up the small black tab on the connector and simply pulling out the ribbon cable(s).
• Insert a spudger or plastic opening tool under the lip of the white bundled cable connector(s), and push the connector(s) free.

On the long edge of the motherboard, remove all of the ribbon and bundled cables.

The ZIF connections are removed by lifting up the small black tab on the connector and simply pulling out the ribbon cable(s).

Insert a spudger or plastic opening tool under the lip of the white bundled cable connector(s), and push the connector(s) free.

Step 5

• On the short edge of the motherboard, remove the yellow wire. To do this, lift up the clamp and pull out the wire.

On the short edge of the motherboard, remove the yellow wire. To do this, lift up the clamp and pull out the wire.

Step 6

• Lift motherboard off the back of the tablet.

Lift motherboard off the back of the tablet.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Hailey Souder                     

Member since: 03/04/2019

210 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Purdue University Northwest, Team S4-G2, Hingst Spring 2019                        

                                                  Member of Purdue University Northwest, Team S4-G2, Hingst Spring 2019 



                    PNW-HINGST-S19S4G2                     


                                            4 Members                     


                                            5 Guides authored