Difficulty
Easy
Steps
6
Time Required
10 - 15 minutes
Sections
2
- Speaker
- 3 steps
- Battery
- 3 steps
Flags
3
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
BackRCA Atlas 10 PRO-S RCTS03W12H1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Speaker
- Using a separating tool, look for a seam in the plastic casing that looks most accessible.
- Use the prying tool to separate the front and back casing, working your way around the perimeter.
- Utilize a card tool or a pick to assist in keeping the case separated.
- To reassemble the device simply align the two casing halves and pinch to snap together or press down on the edges while the device in on a table.
Using a separating tool, look for a seam in the plastic casing that looks most accessible.
Use the prying tool to separate the front and back casing, working your way around the perimeter.
Utilize a card tool or a pick to assist in keeping the case separated.
To reassemble the device simply align the two casing halves and pinch to snap together or press down on the edges while the device in on a table.
1024
Step 2
- Flip over the back of the device while keeping it close to the front, the speaker is attached to it.
- Remove the yellow tape securing the speaker to the back casing.
Flip over the back of the device while keeping it close to the front, the speaker is attached to it.
Remove the yellow tape securing the speaker to the back casing.
Step 3
- Use the separating tool to pry the speaker from its surface.
- Use caution when removing the speaker, you may damage the screen.
- Cut or desolder the wires to replace or repair the speaker.
Use the separating tool to pry the speaker from its surface.
Use caution when removing the speaker, you may damage the screen.
Cut or desolder the wires to replace or repair the speaker.
Step 4
Battery
- Peel off the black tape on the battery and main-board.
- Peel off the black tape securing the screen ribbon cable to the back of the screen.
- Use caution to avoid damaging either ribbon cable.
Peel off the black tape on the battery and main-board.
Peel off the black tape securing the screen ribbon cable to the back of the screen.
Use caution to avoid damaging either ribbon cable.
Step 5
- Slide out the ribbon cable lock that is securing the screen ribbon cable.
- Move the ribbon cable out of the way using tape if necessary.
Slide out the ribbon cable lock that is securing the screen ribbon cable.
Move the ribbon cable out of the way using tape if necessary.
Step 6
- Remove the yellow tape securing the battery to the screen.
- Use a plastic card or pick to separate the battery from the screen.
- Do not bend or puncture battery, battery is difficult to separate from screen.
- Cut or desolder the wires on the battery to remove or replace it.
Remove the yellow tape securing the battery to the screen.
Use a plastic card or pick to separate the battery from the screen.
Do not bend or puncture battery, battery is difficult to separate from screen.
Cut or desolder the wires on the battery to remove or replace it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
9 other people completed this guide.
Author
with 5 other contributors
Dayne Russell
Member since: 01/27/2015
401 Reputation
4 Guides authored
Badges:
5
+2 more badges
Team
Pasco Hernando, Team 1-1, Prince Winter 2015
Member of Pasco Hernando, Team 1-1, Prince Winter 2015
PHSC-PRINCE-W15S1G1
6 Members
10 Guides authored
