Difficulty

Easy

Steps

8

Time Required

                          20 - 30 minutes

Sections

1

  • Battery
  • 8 steps

Flags

0

  • BackRCA RCT6303W87

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove nine 4.8mm screws around the case with a JIS #00 screwdriver.

Remove nine 4.8mm screws around the case with a JIS #00 screwdriver.

1024

Step 2

  • Insert plastic opening tool and slide it around the edges until the cover starts to pop off. It may be necessary to go over each side multiple times in order to pop the cover off.

Insert plastic opening tool and slide it around the edges until the cover starts to pop off. It may be necessary to go over each side multiple times in order to pop the cover off.

Step 3

  • Remove cover completely.

Remove cover completely.

Step 4

  • Disconnect battery cable from the motherboard.

Disconnect battery cable from the motherboard.

Step 5

  • Pull the thin black keyboard connector off and set it aside.

Pull the thin black keyboard connector off and set it aside.

Step 6

  • Disconnect the thick black band (bus) using a plastic opening tool or fingernail.

Disconnect the thick black band (bus) using a plastic opening tool or fingernail.

Step 7

  • Use nylon spudger tool or plastic card to separate battery from the case.

Use nylon spudger tool or plastic card to separate battery from the case.

Step 8

  • Carefully peel off the battery.

Carefully peel off the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      14 other people completed this guide.

Author

                                      with 3 other contributors 


                    Akitaka Hashimoto

Member since: 03/27/2018

510 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       IUPUI, Team S3-G2, Harley Spring 2018                        

                                                  Member of IUPUI, Team S3-G2, Harley Spring 2018 



                    IUPUI-HARLEY-S18S3G2                     


                                            3 Members                     


                                            2 Guides authored

Diamante Swift - Oct 30, 2019

Reply

Thank you very much for the instructions. I was totally in the blind about what to unplug or not.

George Phillips - Nov 10, 2019

Reply

“Remove nine 4.8mm screws “ but you only show pictures of 7 screws.

Steve Bunce - Apr 29, 2021

Reply

Thanks for the instructions. I don’t know if mine is newer or older but the bus cable turns 90 degrees and goes under the keyboard cable so step 6 really wasn’t necessary. A plastic putty knife slid under old battery loosening the adhesive so you can slide it out from under the bus cable.

denise turley - Dec 5, 2021

Reply

Super helpful- worked great!