Difficulty
Easy
Steps
10
Time Required
25 - 35 minutes
Sections
2
- Battery
- 8 steps
- Speaker
- 2 steps
Flags
0
BackRCA RCT6303W87
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove nine 4.8mm screws around the case with a JIS #00 screwdriver.
Remove nine 4.8mm screws around the case with a JIS #00 screwdriver.
1024
Step 2
- Insert plastic opening tool and slide it around the edges until the cover starts to pop off. It may be necessary to go over each side multiple times in order to pop the cover off.
Insert plastic opening tool and slide it around the edges until the cover starts to pop off. It may be necessary to go over each side multiple times in order to pop the cover off.
Step 3
- Remove cover completely.
Remove cover completely.
Step 4
- Disconnect battery cable from the motherboard.
Disconnect battery cable from the motherboard.
Step 5
- Pull the thin black keyboard connector off and set it aside.
Pull the thin black keyboard connector off and set it aside.
Step 6
- Disconnect the thick black band (bus) using a plastic opening tool or fingernail.
Disconnect the thick black band (bus) using a plastic opening tool or fingernail.
Step 7
- Use nylon spudger tool or plastic card to separate battery from the case.
Use nylon spudger tool or plastic card to separate battery from the case.
Step 8
- Carefully peel off the battery.
Carefully peel off the battery.
Step 9
Speaker
- Disconnect the speaker cord from the motherboard.
Disconnect the speaker cord from the motherboard.
Step 10
- Use the plastic spudger to slide the speaker out.
Use the plastic spudger to slide the speaker out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Akitaka Hashimoto
Member since: 03/27/2018
510 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
IUPUI, Team S3-G2, Harley Spring 2018
Member of IUPUI, Team S3-G2, Harley Spring 2018
IUPUI-HARLEY-S18S3G2
3 Members
2 Guides authored