Difficulty
Easy
Steps
2
Time Required
5 - 10 minutes
Sections
1
- Power Button
- 2 steps
Flags
0
BackRCA RCT6378W2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Verify that the power button needs to be replaced by ensuring that the device charger is functioning properly, and that the battery has a charge.
Before beginning, make sure the device is powered off. This may require allowing the battery to drain if power cannot be shut off manually due to the malfunctioning power button. Make sure the device is not connected to any external power source.
What you need
Step 1
Power Button
- Remove two 2.4mm x 4mm screws from bottom of the tablet with Phillips #00 Screwdriver
- Remove back cover with plastic opening tool to access the power button.
Remove two 2.4mm x 4mm screws from bottom of the tablet with Phillips #00 Screwdriver
Remove back cover with plastic opening tool to access the power button.
1024
Step 2
- Remove and replace the power button using tweezers.
- Install in reverse order of removal.
Remove and replace the power button using tweezers.
Install in reverse order of removal.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Author
with 3 other contributors
mikayla
Member since: 01/29/2015
408 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
Clemson, Team 14-4, Shirley Spring 2015
Member of Clemson, Team 14-4, Shirley Spring 2015
CLEM-SHIRLEY-S15S14G4
6 Members
15 Guides authored
Michael Stephenson - Oct 10, 2019
Reply
You are the best!!
Thank You, Thank You, Thank You!!