Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
1
- Battery
- 3 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackRCA RCT6773W22
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the two 5mm screws from the bottom of the device using a Phillips #000 screwdriver.
Remove the two 5mm screws from the bottom of the device using a Phillips #000 screwdriver.
1024
Step 2
- Place the plastic opening tool between the case and the screen.
- Slide the tool clockwise around the case until all the clips are removed.
- Do not completely separate the case from the screen because there is a wire connecting the motherboard to the speaker.
Place the plastic opening tool between the case and the screen.
Slide the tool clockwise around the case until all the clips are removed.
Do not completely separate the case from the screen because there is a wire connecting the motherboard to the speaker.
Step 3
- Desolder the two wires that connect the battery to the motherboard.
- Learn more about soldering with this soldering technique guide.
- Using the blue plastic opening tool, lift the battery away from the device.
Desolder the two wires that connect the battery to the motherboard.
Learn more about soldering with this soldering technique guide.
Using the blue plastic opening tool, lift the battery away from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Kelsea Weber
Member since: 11/12/2015
18,948 Reputation
32 Guides authored
Badges:
47
+44 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,767 Guides authored
Cathy Hajo - Apr 8, 2018
Reply
Umm, which battery do you need for it? Seems that’s a part that is kind of important.