Rca Visys 25424Re1 Keypad Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          20 - 30 minutes            

Sections

2

• Base
• 3 steps
• Keypad
• 2 steps

Flags

0

• BackRCA ViSYS 25424RE1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Base               

• Remove the eight 11mm screws found on the bottom side of the base with a Phillips #00 screwdriver.

Remove the eight 11mm screws found on the bottom side of the base with a Phillips #00 screwdriver.

1024

Step 2

• Use a plastic opening tool to separate the back and front pieces.
• Gently remove the back cover, because the wires are connected to each piece.

Use a plastic opening tool to separate the back and front pieces.

Gently remove the back cover, because the wires are connected to each piece.

Step 3

• Unclip the wires that connect the front piece to the circuit board on the back piece.

Unclip the wires that connect the front piece to the circuit board on the back piece.

Step 4

              Keypad               

• Remove the nine 11mm screws from the board using a Phillips #00 screwdriver, in order to expose the keyboard pressure sensors.

Remove the nine 11mm screws from the board using a Phillips #00 screwdriver, in order to expose the keyboard pressure sensors.

Step 5

• Lift the rubber keypad.
• Use a pair of tweezers to lift the number pad from both ends at the same time.

Lift the rubber keypad.

Use a pair of tweezers to lift the number pad from both ends at the same time.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Munija Ramin                     

Member since: 02/18/2015

143 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Penn State, Team 1-17, Kaschak Winter 2015                        

                                                  Member of Penn State, Team 1-17, Kaschak Winter 2015 



                    PSU-KASCHAK-W15S1G17                     


                                            4 Members                     


                                            6 Guides authored