Difficulty

Moderate

Steps

5

Time Required

                          20 - 30 minutes

Sections

2

  • Base
  • 3 steps
  • Speaker
  • 2 steps

Flags

0

  • BackRCA ViSYS 25424RE1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Base
  • Remove the eight 11mm screws found on the bottom side of the base with a Phillips #00 screwdriver.

Remove the eight 11mm screws found on the bottom side of the base with a Phillips #00 screwdriver.

1024

Step 2

  • Use a plastic opening tool to separate the back and front pieces.
  • Gently remove the back cover, because the wires are connected to each piece.

Use a plastic opening tool to separate the back and front pieces.

Gently remove the back cover, because the wires are connected to each piece.

Step 3

  • Unclip the wires that connect the front piece to the circuit board on the back piece.

Unclip the wires that connect the front piece to the circuit board on the back piece.

Step 4

              Speaker
  • Use a Phillips #00 screwdriver to remove the three 11mm screws to separate the speaker from its base.

Use a Phillips #00 screwdriver to remove the three 11mm screws to separate the speaker from its base.

Step 5

  • Once the screws are taken out, use tweezers to remove the hot glue from the wires.
  • Be careful when removing the hot glue to ensure that the wires remain intact.

Once the screws are taken out, use tweezers to remove the hot glue from the wires.

Be careful when removing the hot glue to ensure that the wires remain intact.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Mit Patel

Member since: 01/27/2015

255 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Penn State, Team 1-17, Kaschak Winter 2015                        

                                                  Member of Penn State, Team 1-17, Kaschak Winter 2015 



                    PSU-KASCHAK-W15S1G17                     


                                            4 Members                     


                                            6 Guides authored