Redoctane X Plorer Rear Case Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          15 minutes            

Sections

1

• Rear Case
• 3 steps

Flags

0

• BackRedOctane X-Plorer

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Case               

• Remove the strap by pulling it off of the mounts located on the body and neck.

Remove the strap by pulling it off of the mounts located on the body and neck.

1024

Step 2

• Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.
• Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.
• These screws can also be Torx on some models.
• Pull off the rear case.

Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

These screws can also be Torx on some models.

Pull off the rear case.

Step 3

• Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.
• Pull off the top shell of the neck to expose the internal features.

Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

Pull off the top shell of the neck to expose the internal features.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 

                    Riley                     

Member since: 04/18/2018

649 Reputation

                                      7 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team S17-G1, Livingston Spring 2018                        

                                                  Member of Cal Poly, Team S17-G1, Livingston Spring 2018 



                    CPSU-LIVINGSTON-S18S17G1                     


                                            3 Members                     


                                            9 Guides authored