Redoctane X Plorer Strum Bar Sensor Board Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          20 minutes

Sections

Rear Case
3 steps
Strum Bar Sensor Board
1 step

Flags

BackRedOctane X-Plorer
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Rear Case

Remove the strap by pulling it off of the mounts located on the body and neck.

Remove the strap by pulling it off of the mounts located on the body and neck.

1024

Step 2

Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.
Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.
These screws can also be Torx on some models.
Pull off the rear case.

Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

These screws can also be Torx on some models.

Pull off the rear case.

Step 3

Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.
Pull off the top shell of the neck to expose the internal features.

Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

Pull off the top shell of the neck to expose the internal features.

Step 4

              Strum Bar Sensor Board

Use a screwdriver to remove the four 14mm Phillips #1 screws around the perimeter of the strum bar sensor board.
Lift up on the strum bar sensor board to remove it from the case.

Use a screwdriver to remove the four 14mm Phillips #1 screws around the perimeter of the strum bar sensor board.

Lift up on the strum bar sensor board to remove it from the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Riley

Member since: 04/18/2018

649 Reputation

                                      7 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team S17-G1, Livingston Spring 2018                        

                                                  Member of Cal Poly, Team S17-G1, Livingston Spring 2018 



                    CPSU-LIVINGSTON-S18S17G1                     


                                            3 Members                     


                                            9 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team