Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

2

  • Rear Case
  • 3 steps
  • Whammy Bar Sensor
  • 3 steps

Flags

0

  • BackRedOctane X-Plorer

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case
  • Remove the strap by pulling it off of the mounts located on the body and neck.

Remove the strap by pulling it off of the mounts located on the body and neck.

1024

Step 2

  • Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.
  • Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.
  • These screws can also be Torx on some models.
  • Pull off the rear case.

Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

These screws can also be Torx on some models.

Pull off the rear case.

Step 3

  • Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.
  • Pull off the top shell of the neck to expose the internal features.

Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

Pull off the top shell of the neck to expose the internal features.

Step 4

              Whammy Bar Sensor
  • Remove the two 7mm Phillips #0 screws.
  • Using your fingers, remove the black wire retainer.

Remove the two 7mm Phillips #0 screws.

Using your fingers, remove the black wire retainer.

Step 5

  • Using one hand, remove the whammy bar and its attached components from the case.

Using one hand, remove the whammy bar and its attached components from the case.

Step 6

  • Using two hands, remove the whammy bar sensor.

Using two hands, remove the whammy bar sensor.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Riley

Member since: 04/18/2018

649 Reputation

                                      7 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team S17-G1, Livingston Spring 2018                        

                                                  Member of Cal Poly, Team S17-G1, Livingston Spring 2018 



                    CPSU-LIVINGSTON-S18S17G1                     


                                            3 Members                     


                                            9 Guides authored