Difficulty
Difficult
Steps
7
Time Required
20 minutes
Sections
2
- Cover Assembly
- 5 steps
- Thermal Switch
- 2 steps
Flags
1
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackRemington MB4040
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove Blade Assembly
- Press the black button below the blade to remove the blade.
Press the black button below the blade to remove the blade.
1024
Step 2
Remove Back Cover Hardware
- Place the device so the back of the product is facing up.
- Remove the two 11.0 mm PH00 screws from the black plastic housing at the bottom of the device.
Place the device so the back of the product is facing up.
Remove the two 11.0 mm PH00 screws from the black plastic housing at the bottom of the device.
Step 3
Remove Front Cover Hardware
- Remove the chrome plated plastic piece by using the plastic opening tool to pry it from the housing assembly.
- Remove the small clear plastic piece that covers the zoom wheel numbers.
Remove the chrome plated plastic piece by using the plastic opening tool to pry it from the housing assembly.
Remove the small clear plastic piece that covers the zoom wheel numbers.
Step 4
Front Cover (cont.)
- Remove the two 16.0 mm PH00 screws from the front cover.
- Use the blue plastic opening tool to pry apart the two halves of the device.
Remove the two 16.0 mm PH00 screws from the front cover.
Use the blue plastic opening tool to pry apart the two halves of the device.
Step 5
Blade Button Removal
- Remove the black blade button and the two 10.0 mm springs, which are sandwiched between the cover assembly halves.
- The blade button is sandwiched between the halves and the two springs may fall out when the halves are separated.
Remove the black blade button and the two 10.0 mm springs, which are sandwiched between the cover assembly halves.
The blade button is sandwiched between the halves and the two springs may fall out when the halves are separated.
Step 6
Remove Motherboard
- Remove the four 9.0 mm PH00 screws.
- Remove the motherboard by using the plastic opening tool.
- This can be performed with the Remington MB4040 Zoom Wheel Replacement installed or removed.
Remove the four 9.0 mm PH00 screws.
Remove the motherboard by using the plastic opening tool.
This can be performed with the Remington MB4040 Zoom Wheel Replacement installed or removed.
Step 7
Remove Thermal Switch
- Separate the thermal switch from the battery by using a spudger to pry it from the adhesive.
- Use a low temperature RTV to readhere the thermal switch to the battery.
- Remove the soldering holding the thermal switch to the motherboard.
Separate the thermal switch from the battery by using a spudger to pry it from the adhesive.
Use a low temperature RTV to readhere the thermal switch to the battery.
Remove the soldering holding the thermal switch to the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Cameron Carnahan
Member since: 01/20/2015
1,032 Reputation
6 Guides authored
Badges:
15
+12 more badges
Team
USF Tampa, Team 1-5, Blackwell Winter 2015
Member of USF Tampa, Team 1-5, Blackwell Winter 2015
USFT-BLACKWELL-W15S1G5
3 Members
7 Guides authored
