Difficulty
Moderate
Steps
8
Time Required
10 - 15 minutes
Sections
2
- Cover Assembly
- 5 steps
- Zoom Wheel
- 3 steps
Flags
0
BackRemington MB4040
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove Blade Assembly
- Press the black button below the blade to remove the blade.
Press the black button below the blade to remove the blade.
1024
Step 2
Remove Back Cover Hardware
- Place the device so the back of the product is facing up.
- Remove the two 11.0 mm PH00 screws from the black plastic housing at the bottom of the device.
Place the device so the back of the product is facing up.
Remove the two 11.0 mm PH00 screws from the black plastic housing at the bottom of the device.
Step 3
Remove Front Cover Hardware
- Remove the chrome plated plastic piece by using the plastic opening tool to pry it from the housing assembly.
- Remove the small clear plastic piece that covers the zoom wheel numbers.
Remove the chrome plated plastic piece by using the plastic opening tool to pry it from the housing assembly.
Remove the small clear plastic piece that covers the zoom wheel numbers.
Step 4
Front Cover (cont.)
- Remove the two 16.0 mm PH00 screws from the front cover.
- Use the blue plastic opening tool to pry apart the two halves of the device.
Remove the two 16.0 mm PH00 screws from the front cover.
Use the blue plastic opening tool to pry apart the two halves of the device.
Step 5
Blade Button Removal
- Remove the black blade button and the two 10.0 mm springs, which are sandwiched between the cover assembly halves.
- The blade button is sandwiched between the halves and the two springs may fall out when the halves are separated.
Remove the black blade button and the two 10.0 mm springs, which are sandwiched between the cover assembly halves.
The blade button is sandwiched between the halves and the two springs may fall out when the halves are separated.
Step 6
Remove screws attaching the zoom wheel
- Remove the two 11.0 mm PH00 screws that attach the zoom wheel to the plastic housing.
Remove the two 11.0 mm PH00 screws that attach the zoom wheel to the plastic housing.
Step 7
Remove Zoom Wheel Assembly
- Remove zoom wheel assembly from housing using fingers.
- Gently remove zoom wheel assembly because the red and black wires are attached and can easily be broken.
- This assembly also houses the motor.
- Remove the small black piece of plastic surrounding the zoom wheel. This will be referred to as the slider.
- When reassembling, make sure the pins on the slider are aligned inside the grooves of the wheel.
Remove zoom wheel assembly from housing using fingers.
Gently remove zoom wheel assembly because the red and black wires are attached and can easily be broken.
This assembly also houses the motor.
Remove the small black piece of plastic surrounding the zoom wheel. This will be referred to as the slider.
When reassembling, make sure the pins on the slider are aligned inside the grooves of the wheel.
Step 8
Wheel removal
- A pin holds the wheel in place. Using a spudger (preferable metal) and a pair of pliers or tweezers remove the pin to unseat the wheel.
A pin holds the wheel in place. Using a spudger (preferable metal) and a pair of pliers or tweezers remove the pin to unseat the wheel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Cameron Carnahan
Member since: 01/20/2015
1,032 Reputation
6 Guides authored
Badges:
15
+12 more badges
Team
USF Tampa, Team 1-5, Blackwell Winter 2015
Member of USF Tampa, Team 1-5, Blackwell Winter 2015
USFT-BLACKWELL-W15S1G5
3 Members
7 Guides authored
