Difficulty
Very easy
Steps
1
Time Required
20 seconds
Sections
- Removal of a Floppy Disk from a Sony digital Mavica
- 1 step
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSony Camera
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
As with all Mavica cameras until the early 90s (including later commercially sold models) this first model was not digital. Its CCD sensor produced an analog video signal in NTSC format with a resolution of 570 × 490 pixels. Mavipak 2.0" discs (later adopted throughout the industry as Video Floppy and labeled “VF”) were used to write 50 still frames on tracks on the disk. The images could be shown on a television screen, using a ‘special playback display unit’ connected to the TV.
Step 1
Removal of a Floppy Disk from a Sony digital Mavica
- Press and hold the (Red) key to allow the floppy to come out.
- At the same time, drag the lever (blue) to eject and the Floppy will be released.
Press and hold the (Red) key to allow the floppy to come out.
At the same time, drag the lever (blue) to eject and the Floppy will be released.
1024
To reassemble the device, follow these instruction in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Marc developer
Domenyck Paoly
Author
with 2 other contributors
Marc developer
Member since: 08/16/2021
477 Reputation
2 Guides authored
Badges:
8
+5 more badges