Removing Braven Brv X Bottom Outer Casing Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Bottom Outer Casing
3 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

BackBraven BRV-X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

WARNING: In this guide, you will be cutting the warranty seals. Once warranty seals are broken, you may no longer return the product.

TIPS:

Be sure to check the screwdriver heads before performing this task; otherwise, screws may become damaged. Use an ice cube tray or egg carton, place each screw in its own cup to organize the screws.

What you need

Step 1

              Bottom Outer Casing

Flip the Braven BRV-X upside down so you are facing the bottom side.
With the H1.5 Head Screwdriver, unscrew the four screws.
All screws on this device can be stripped easily. Hold your screwdriver with the thumb on top and swivel with the opposite hand’s thumb and index finger.
Using the #0 Phillips screwdriver, unscrew the four screws on the four corners of the bottom side.
Gently remove the outer casing, which should reveal the inner shell.

Flip the Braven BRV-X upside down so you are facing the bottom side.

With the H1.5 Head Screwdriver, unscrew the four screws.

All screws on this device can be stripped easily. Hold your screwdriver with the thumb on top and swivel with the opposite hand’s thumb and index finger.

Using the #0 Phillips screwdriver, unscrew the four screws on the four corners of the bottom side.

Gently remove the outer casing, which should reveal the inner shell.

1024

Step 2

With a Jimmy, cut the two warranty seals on either side.
You may also use a tech knife instead of a Jimmy.
WARNING: Once warranty seals are broken, you may no longer return the product.
Next, remove the 18 screws with a #00 Phillips screwdriver.

With a Jimmy, cut the two warranty seals on either side.

You may also use a tech knife instead of a Jimmy.

WARNING: Once warranty seals are broken, you may no longer return the product.

Next, remove the 18 screws with a #00 Phillips screwdriver.

Step 3

Using two plastic opening tools, slide under the cover and slowly lift.
There is glue nearly all around the inner shell, so strength will be necessary. When both tools are inserted, you can slide out along the edges.

Using two plastic opening tools, slide under the cover and slowly lift.

There is glue nearly all around the inner shell, so strength will be necessary. When both tools are inserted, you can slide out along the edges.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Courtney Crockett

Member since: 09/29/2015

306 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Texas Tech, Team 19-4, Rauch Fall 2015                        

                                                  Member of Texas Tech, Team 19-4, Rauch Fall 2015 



                    TTU-RAUCH-F15S19G4                     


                                            4 Members                     


                                            2 Guides authored

Needs Better Images#

Introduction#

What you need#

#

#

#

#

#

Team#

#

Needs Better Images

Introduction

What you need

Team