Removing Factory Feet From A Mac Laptop Non Retina Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 15 minutes

Sections

Removing factory feet from a Mac Laptop (Non-Retina)
4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackMac Laptop
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

While foot replacement does not need to be done in a set, many modern 3rd party replacements are now rubberized and come in a set and in many cases, the original feet tend to fail as the system ages. If you want to change the set out to fix the problem for good or make your laptop non-slip, this guide will show you how to break the feet for replacement. These steps do not apply to the rMBP (PCIe, T1 and T2) series.

Once the foot is broken, there is no way to go back. Be sure you want to do this before removing surviving feet!While bottom panel damage is unlikely if done with caution, it can happen if you work over an edge.Place the bottom on a flat surface to avoid damaging the cover while doing this. In most cases, the original feet are brittle enough a light cut will suffice.Once the foot is removed, it must be replaced and CANNOT be reused.Make sure you have a set of four available for this procedure as you will need to replace these intentionally damaged feet due to the design.Place the old feet in a container designated for the remains of the original set. This is so you don’t mix them up.

What you need

Step 1

              Remove the bottom cover

I am using a 2011 13" MacBook Pro. Most machines are similar, but variations may exist.
If possible, disconnect the battery to protect your components once the bottom is removed.
Remove the bottom cover of your MacBook with the guide for your specific system.

I am using a 2011 13" MacBook Pro. Most machines are similar, but variations may exist.

If possible, disconnect the battery to protect your components once the bottom is removed.

Remove the bottom cover of your MacBook with the guide for your specific system.

1024

Step 2

              Removing failed feet

Before removing the good feet, remove the failed feet first. These may come off without disassembly if they have fully failed.
After removing the damaged feet, remove the intact feet. Follow the disassembly guide for your specific Mac.

Before removing the good feet, remove the failed feet first. These may come off without disassembly if they have fully failed.

After removing the damaged feet, remove the intact feet. Follow the disassembly guide for your specific Mac.

Step 3

              (Full set replacement only) Removing intact feet

To remove the intact feet, score the internal plug. Once scored, remove the plug with a guitar pick.
After removing the inner plug, push the foot out with a spudger or screwdriver.

To remove the intact feet, score the internal plug. Once scored, remove the plug with a guitar pick.

After removing the inner plug, push the foot out with a spudger or screwdriver.

Step 4

              Install the new feet

If the adhesive ring remains, remove it first. Clean the chassis with denatured alcohol or adhesive cleaner.
After removing the old feet, install the new set onto the bottom cover.
Re-install the cover on the computer.

If the adhesive ring remains, remove it first. Clean the chassis with denatured alcohol or adhesive cleaner.

After removing the old feet, install the new set onto the bottom cover.

Re-install the cover on the computer.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 1 other contributor

                    Nick

Member since: 11/10/2009

80,540 Reputation

                                      41 Guides authored                  



                       Badges:
                       55







                                                        +52 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored

Member-Contributed Guide#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Member-Contributed Guide

Introduction

What you need

Team