Difficulty

Very easy

Steps

6

Time Required

                          1 minute

Sections

2

  • Removing the HP Compaq dx2000MT Case Doors
  • 4 steps
  • PCI Cards
  • 2 steps

Flags

0

  • BackHP Compaq dx2000MT

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removing the HP Compaq dx2000MT Case Doors
  • Turn off your computer and remove the power cable by pulling it straight out of its socket.

Turn off your computer and remove the power cable by pulling it straight out of its socket.

1024

Step 2

  • Remove the two Phillips #2 screws that secure the case door to the device.

Remove the two Phillips #2 screws that secure the case door to the device.

Step 3

  • Remove the side case door by pushing towards the rear of the device with your hand.
  • This may take considerable force so keep pushing!
  • Once you slide the door back, remove it by pulling it outwards from the device.

Remove the side case door by pushing towards the rear of the device with your hand.

This may take considerable force so keep pushing!

Once you slide the door back, remove it by pulling it outwards from the device.

Step 4

  • Remove the side case door by pushing towards the rear of the device with your hand.
  • Once again, this may take considerable force.
  • Once you slide the door back, remove it by pulling it outwards from the device.

Once again, this may take considerable force.

Step 5

              PCI Cards
  • Remove the Torx T15 screwdriver holding the PCI card in place.

Remove the Torx T15 screwdriver holding the PCI card in place.

Step 6

  • Remove the PCI card by pulling it out towards the side of the device.
  • Be careful about touching the top and bottom of the card! The static electricity in your fingers could short it. If you can, only touch the metal bracket and the sides of the card.

Remove the PCI card by pulling it out towards the side of the device.

Be careful about touching the top and bottom of the card! The static electricity in your fingers could short it. If you can, only touch the metal bracket and the sides of the card.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 2 other contributors 


                    Logan Pace

Member since: 10/12/2011

2,197 Reputation

                                      9 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Cal Poly, Team 17-16, Regan Fall 2011                        

                                                  Member of Cal Poly, Team 17-16, Regan Fall 2011 



                    CPSU-REGAN-F11S17G16                     


                                            4 Members                     


                                            17 Guides authored