Removing Nikon Coolpix 4600 Front And Rear Case Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 15 minutes

Sections

Front and Rear Case
3 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

BackNikon Coolpix 4600
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Front and Rear Case

Locate the six screws on the outside of the camera (2 3.3 mm on the bottom, 2 5.25 mm on the left, and 2 5.25 mm on the right).
Using a Phillips 00 screwdriver, remove all of the six screws.

Locate the six screws on the outside of the camera (2 3.3 mm on the bottom, 2 5.25 mm on the left, and 2 5.25 mm on the right).

Using a Phillips 00 screwdriver, remove all of the six screws.

1024

Step 2

Carefully pull the front and back case apart.
The front case is attached to internal components and cannot be removed independently.

Carefully pull the front and back case apart.

The front case is attached to internal components and cannot be removed independently.

Step 3

Look closely at the connection between the ribbon cable and the motherboard. Locate the two grey tabs on either side of the connecting bracket.
Slide the grey tabs toward the bottom of camera. Gently disconnect the ribbon cable from the motherboard.
After disconnecting the data ribbon, you can now separate the back case from the front case.

Look closely at the connection between the ribbon cable and the motherboard. Locate the two grey tabs on either side of the connecting bracket.

Slide the grey tabs toward the bottom of camera. Gently disconnect the ribbon cable from the motherboard.

After disconnecting the data ribbon, you can now separate the back case from the front case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 9 other contributors

                    Nathan Sperling

Member since: 05/08/2012

104 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 9-43, Regan Spring 2012                        

                                                  Member of Cal Poly, Team 9-43, Regan Spring 2012 



                    CPSU-REGAN-S12S9G43                     


                                            5 Members                     


                                            12 Guides authored

Action Shots#

Introduction#

What you need#

#

#

#

#

#

Team#

#

Action Shots

Introduction

What you need

Team