Removing Olympus Fe 210 Front Casing Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          2 - 5 minutes            

Sections

2

• Battery
• 2 steps
• Front Casing
• 2 steps

Flags

1

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

• BackOlympus FE-210

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• The battery compartment is located on the bottom side of the camera. Push the button in, and slide the cover to get access to the batteries.

The battery compartment is located on the bottom side of the camera. Push the button in, and slide the cover to get access to the batteries.

1024

Step 2

• The batteries will slide right out.
• When putting new batteries in, make sure they are pointing the right direction.

The batteries will slide right out.

When putting new batteries in, make sure they are pointing the right direction.

Step 3

              Front Casing               

• Remove the 7 screws holding the front case in place, with a #00 screwdriver.
• Six screws are 3.6 mm.
• The seventh screw is 3.2 mm.

Remove the 7 screws holding the front case in place, with a #00 screwdriver.

Six screws are 3.6 mm.

The seventh screw is 3.2 mm.

Step 4

• Pulling the front case off, requires applying enough strength in the right areas.
• The front case snaps into place in three places:
• At the top and bottom of the battery side (opposite of side pictured) of the case.
• Right in the middle of the DC-in side (side pictured) of the case.
• Top of the camera, to the left of the power button.
• Once those places are disconnected, the front case will pop right off.
• The camera in the first two pictures is upside down. This is the best position to place your thumbs to remove the case.

Pulling the front case off, requires applying enough strength in the right areas.

The front case snaps into place in three places:

At the top and bottom of the battery side (opposite of side pictured) of the case.

Right in the middle of the DC-in side (side pictured) of the case.

Top of the camera, to the left of the power button.

Once those places are disconnected, the front case will pop right off.

The camera in the first two pictures is upside down. This is the best position to place your thumbs to remove the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Matt                     

Member since: 01/25/2011

781 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 4-36, Regan Winter 2011                        

                                                  Member of Cal Poly, Team 4-36, Regan Winter 2011 



                    CPSU-REGAN-W11S4G36                     


                                            3 Members                     


                                            14 Guides authored