Difficulty

Moderate

Steps

9

Time Required

                          1 - 5 minutes

Sections

4

  • Disk Tray Cover
  • 2 steps
  • Outer Case
  • 2 steps
  • Front Panel
  • 1 step
  • Motherboard
  • 4 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackPanasonic DVD-RV31 Player

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Disk Tray Cover
  • Eject the disk tray from the DVD player before removing power supply.

Eject the disk tray from the DVD player before removing power supply.

1024

Step 2

  • Evenly lift upward on the disk tray front cover (not slanted, as pictured). This will allow for easier disassembly of the player.

Evenly lift upward on the disk tray front cover (not slanted, as pictured). This will allow for easier disassembly of the player.

Step 3

              Outer Case
  • Remove the three screws running along the back edge of case cover.
  • Remove the two screws from each side of the case cover.

Remove the three screws running along the back edge of case cover.

Remove the two screws from each side of the case cover.

Step 4

  • Grab edges of the cover with your hands. Pull outward slightly, then straight up.

Grab edges of the cover with your hands. Pull outward slightly, then straight up.

Step 5

              Front Panel
  • Lift up the five tabs securing the front panel to the chassis. There are three on the bottom, and two on the inside edges of the panel. Panel should then lift off the player.

Lift up the five tabs securing the front panel to the chassis. There are three on the bottom, and two on the inside edges of the panel. Panel should then lift off the player.

Step 6

              Motherboard
  • Remove the blue ribbon wire from its connector. When doing this, be cautious to not damage the connector.
  • Place forefinger under cable loop as shown, gripping with thumb.
  • Pull straight up. It should disconnect with little force.

Remove the blue ribbon wire from its connector. When doing this, be cautious to not damage the connector.

Place forefinger under cable loop as shown, gripping with thumb.

Pull straight up. It should disconnect with little force.

Step 7

  • Using tweezers or pliers, squeeze the tabs of the plastic fasteners together. While doing this, gently lift up on the motherboard until the fasteners are released.

Using tweezers or pliers, squeeze the tabs of the plastic fasteners together. While doing this, gently lift up on the motherboard until the fasteners are released.

Step 8

  • Remove the two screws securing the motherboard using a philips screw driver.

Remove the two screws securing the motherboard using a philips screw driver.

Step 9

  • Lift the board from the side closest to the front panel (top of photo).
  • Gently apply force until bottom connector releases from power board below.

Lift the board from the side closest to the front panel (top of photo).

Gently apply force until bottom connector releases from power board below.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Kevin

Member since: 04/26/2011

354 Reputation

                                      8 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 18-20, Garner Spring 2011                        

                                                  Member of Cal Poly, Team 18-20, Garner Spring 2011 



                    CPSU-GARNER-S11S18G20                     


                                            4 Members                     


                                            11 Guides authored